Posts Tagged ‘ architectural design ’

The images below represent the design process for one customer’s new stairway.  The changes are listed before the renderings.  The program used to model the stairways is Sketchup.  The rendering engine used was Kerkythea.  Let me know what you think:
In this first image the newels and rails and threads were painted black.  The balusters alternate (except the balcony – my mistake)

Philadelphia Newel

Close up of the balcony

Philadelphia Newel

Close up of the balcony with the alternating balusters

Philadelphia Newel

Here we have changed the color to the newels and handrail.  We’ve stained the threads and added box newels to the balcony

Philadelphia Newel

close up of balcony

Philadelphia Newel

In the last rendering we have gone back to the original newels.  The customer decided to go with square bases on the newels (not shown)

Philadelphia Newel

 

 

I don’t often get a request for wooden spheres – in fact I can’t remember ever making something like this , at least not as big as these.  A contractor asked us to reproduce a number of large wooden balls to fill the “kick space ” under the receptionist desk in the reception area of a children’s clinic.  They were to be painted as seen in the original desk seen below.

Reception Ball

Reception Ball

The balls measured 11 5/8″ diameter and were turned from poplar.  Below are some of the balls during and after finish sanding:

large wooden balls

Finished Spheres

ready to ship

ready to ship

 

Video of turning the spheres:

 

 

This is a 6″ newel that we made for a customer on the East Coast.  The home owner  had an older newel that he really liked and asked if we could reproduce.  The difficulty on making an exact reproduction of any large piece is in either having it shipped to my shop in South Louisiana or in some cases removing it from a finished stairway.  Such was the issue here. The best that could be done was to take a good resolution picture and email it to me.  So after the picture arrived I made a rendering using Google Sketchup.  The original image is below with the model and changes desired by the home owner.

original image and my first model

original image and my first model

 

And finally the finished soft maple newel.  The cap was provided by the home owner.

Soft Maple Newel

Thanks to Google for this wonderful online image app – Picassa

This is a slide show of my newel collection from many of the newels we have turned from customers over the years:

Some are my designs but many are designs from my customer, or in some cases, modifications made to my designs to suit the need of my customers. My standard deigns can be seen here: Archturnings.com

I occasionally like to come up with a new design idea especially new newel designs. Below is my latest attempt.   Octagons have always had a warm place in my heart and apparently in the heart of many wood turners and woodworkers before me. Octagon newels and architectural design features were prevalent in the 19th century and before.
Most of the large stair manufacturing companies are more interested in smaller turned newels that can be produced quickly and never concern themselves, IMHO, with finer designs ideas.  Below are two possibilities. The first has a octagonal base – the second with a square base. Both are over-the-post newels – ie the handrail attaches to the newel cap and runs continuously “over” the newels.

For an understanding of how these caps attach to the handrail you might want to check out this article on my other site: newel cap installation

tapered octagon newel

tapered octagon newel

square base octagon newel

square base octagon newel

One of my customers needed several replacement balusters for her stair project in New York. After sending me an original, we carefully made a CAD (Computer Aided Design) drawing and then had the templates cut by a local company with a laser CNC (Computer Numeric Control) machine. You should be able to see the 8 lighter colored balusters near the bottom of the stairway.  If memory serves me these were crafted from cherry.  After finishing the balusters should blend in quite well.

baluster reproduction

baluster reproduction

These maple newels posts were made for a customer in Michigan.  The base on these is eight inches wide by 44″ high (not including the newel cap).  As such, in maple, they weigh in at about 65 pounds.   You might not be able to tell but the newels are in soft maple (slightly paler) but the newel caps are made from hard maple (a little browner).  The grain pattern is very similar.  The reason for the difference was because my normal suppliers were out of hard maple.  My customer agreed to the switch.  After staining the difference will disappear.  These particular caps are flat as you can see on top (required by the contractor).  Normally I have little bit of detail on the top of the cap.  The caps will miter into a 6210 handrail.

maple newel posts

maple newel posts

Recently a contractor contacted us about replicating an old newel.  We’ve seen similar styles from the turn of the last century and before.  Apparently this particular style was popular in the 1800’s.  This newel post has an octagon base and an octagon detail above the base.   The original is in mahogany but the builder has decided to paint this one for a new home that is currently in process.  The old newel was a good bit shorter than the one rendered here.  Modern building codes require higher rail heights than those of a century back.  We have not turned this one yet but the builder has approved the rendering.  The newel cap is missing and will eventually match the handrail profile.

By the way the drawing was created in a CAD program, imported into Sketchup and rendered in a Maxwell rendering plugin designed for Sketchup.

 

Octagon newel

Octagon newel

Rendered Octagon Newel

Rendered Octagon Newel

<

The lighthouse newel for this project was similar to a newel that we made for a customer in North Carolina. This particular stairway went to a customer in South Florida. The architect wanted to match the balusters to the newel so we created a simple taper with matching beads top and bottom.

lighthouse stairs

The wood paneling on the walls is salvaged heart pine as well as the stair treads. The stair handrail, however, is mahogany. We turned the balusters and newels from poplar.

lighthouse stairs

The challenge for the installer was to “cope” the handrail fitting unto the radiused newel (not shown). Most handrails attach into a “flat” on the newel or over the top in the case of an over the post newel. This one, however, attached to the round part of the newel.

Other images of the balusters and newels can be seen here: Lighthouse newels and balusters

These beauties went into a home in the Carolinas. (You’ve got to love the balcony with the large radiused rail.) There were two staircases in this home.

Barley Balusters

 

newel and balustersThe image below is the balcony seen from the first floor

from underneathThis is the rear stairway in the home.  The difference in this staircase is that the balusters alternate between a plain tapered and barley twisted balusters.  The newel is what we call our “pottery” newel since it sort of replicates a newel one of my customers saw in a Pottery Barn catalog.

Alternating balusters