I have to confess this is a newel that I have not made nor is it one that I cannot “easily” make. I don’t have the proper equipment to make it. The machine that would make this newel is called a hauncher (hence the title). Though I cannot presently make it, I can draw it. If there is enough interest in the style I will purchase a hauncher to make it. The newel is 8 inches wide at the base and about 50 inches high. I really like this design.
I think everyone loves lighthouses- at least my wife and I do. And as stair newels have a the general shape of a lighthouse it seems appropriate that some would take the form of a lighthouse. I have to say that I designed one for a contractor in New York several years ago and he really didn’t like the outcome. One of the challenges of designing one is figuring out where to attach the handrail. Since lighthouses are predominately cylindrical there is no natural “flat” in a post-to-post lighthouse newel to easily attach the rail. An over-the-post version would eliminate (or minimize) the top of the lighthouse features. The only reasonable alternative is to attach the rail to the upper cylindrical part of the newel – an installation challenge.
Whatever!! The following renderings was designed by me as a prototype. It is 5 1/2 inches across the octagonal base. The handrail (not shown) would attach just below the band below the lighthouse lens.
The design below was copied by me from a magazine image provided by the customer. The base is 10 inches (mammoth) X 54 inches high
This is the same newel as above with the stair detail shown. The tread sort of wraps around the newel base. We turned this in poplar and the newel was painted as shown. The customer installed square balusters however.
The following renderings are different versions of a pedestal newel I am developing. They go from about 5 1/2 inch base with 3 1/2 inch turning to about a 8 inch square base with 5 1/2 inch diameter turning. All models depict over the post style newel but certainly a post to post newel could be made. These would have to be shipped in pieces so that the final length of the base could be cut. The column and moldings could be attached after the base is cut and installed.
The spiral top of the newel below is another variation on a theme. Of course, there are endless possibilities. The bases on these have recessed flat panels which could be made with raised panels or left plain. The ionic columns could be fluted as well as plain.
These alder stair newels were turned for a customer in the Colorado Springs, CO area. They measure 5 1/2 inches X 44 inches. The newel cap is not shown but will match the handrail sample sent to me (below). Obviously the newels are over-the-post newels. The newel cap (with matching handrail profile) will be mitered to receive the handrail.
We were just contracted by a customer to make these poplar balusters and starter newel for a home in Connecticut. The post-to-post newel has an octagon base middle and top. The top id quite narrow and will require the handrail to attach horizontally. As such, an up easing will have to be used. The handrail attaching on the rake angle would be too wide for the newel top. The newel measures 8″ at the widest. The design is based on the image from a magazine article and came off quite nicely. The balusters are a based on the image from the same magazine article. The pattern was a common pattern used at the turn of the last century and prior to.
I did not turn these. My partner in crime (turning crime that is) turned these. Great job Walter!
These fluted newels went to a customer in Aspen, Co. The large fluted newels are 7 inches in diameter. The shorter non-fluted newels are 6 inches in diameter. I questioned whether they really wanted the flat capitals on top of the newels. It will probably become a place to set things on top of – cups, clothes, etc.
I felt sorry for the installers knowing there was no suitable place to attach the handrail. The installer was forced to “cope” the handrail to a round, fluted profile, not the easiest method I could think of to say the least.
fluted newel
We have uploaded a few photo album sets on various places on the world wide web. I thought some of our customers might like to see them in total – nothing like a picture to get the creative juices flowing. The pictures contained in the album below are a random set of the stair newels and other wood turnings we have produced in our Baton Rouge, LA shop. Some pictures are of “one offs” – newels that were turned for one customer and never produced again. Others have been produced multiplied times over. You can follow the link below to see a good sampling of our stair newels.
I occasionally like to look at newel and baluster designs online to “rev” up my creative juices since I often am called upon to design both for my customers. I found this beauty on Jerry West’s Flickr account and thought I would post it here. Hat’s off to him for a fine design and execution. You will enjoy seeing some of the other pieces he has posted in his account. Click on the link below the image.
walnut newel
These stair newels were made for a customer in North Carolina. They were designed to emulate a pair of cherry kitchen island legs that someone else had turned for him some time back. The newels were going into three stairways that he was in the process of redoing in his 8-10 year old home. They are crafted from mahogany and are 6″ wide X various lengths to accommodate his unique situation. As you can see they are over-the-post designs with newel caps that will match 6310 style handrails. For an explanation of how these caps attach to the handrails you might like to visit here: Installing newel caps
Rope Twisted Newels
These poplar stair newels were created for a customer to be painted. They are over-the-post newels that sport red oak newel caps that will be joined to a 6310 style red oak handrail. Though the newels are painted, the handrail and newel caps will be stained. I have a good article with images on explaining how to join a newel cap to a handrail/handrail fitting. You can read it here: Newel Cap Joinery.
The smaller newels are 5 1/2″, the larger are 7″ at the squares. They can be seen on my web site here:N105 fluted newel - N109 Fluted newel
Over-the-Post Fluted Newels
